BlueNet Video BB01 Bedienungsanleitung

Internet Video Server IVS-100 User’s Manual

2 Chapter 2 Basic Setup This Chapter provides details of installing and configuring the IVS-100. System Requirements • To use the LAN interface, a s

Installation 1. Attach video signal source to the IVS-100 To use Video Server, it is required to supply video signal to this device. Typical, user ma

5. Check the LEDs When powering on machine, the status LED will turn green. It means the system is booting up successfully. Furthermore, if you have

Setup Initial setup can be performed either from the web browser or using the supplied Win-dows-based camera utilities. This program can locate the I

• After modifications, you may now connect IVS-100 via web browser. 10

3 Chapter 3 Advanced Viewing Setup This Chapter provides information about the optional settings and fea-tures for viewing video via the IVS-100. Thi

Camera setting 3. Make the required adjustments, as explained below, and save your changes. Video Settings Resolution Select the desired video res

Controlling User Access to the Video Stream By default, only system administrators can connect to the IVS-100 and view live Video. If desired, you ma

Making Video available from the Internet If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you c

This means that other Internet users don't know the IP address, so can't establish a connection. DDNS is designed to solve this problem, by

Copyright Copyright (C) 2005 PLANET Technology Corp. All rights reserved. The products and programs described in this User’s Manual are licensed prod

The "Port" for the Port Forwarding / Virtual Server entry above is the "Second Port" number specified on the Network screen of t

You can then select IVS-100 in IVS-100s list on the main screen, and click OK to es-tablish a connection and view live video. Please check respective

4 Chapter 4 Web-based Management This Chapter provides Setup details of the IVS-100’s Web-based Inter-face. This Chapter is for Administrators only.

Welcome Screen If the CCTV camera and the video server are properly connected, the video server Home screen will be displayed. Video server Home Scr

Viewing Area This screen is displayed when you log in machine Viewing Area Screen • The IVS-100 web page requires ActiveX control to display the v

Control Panel Screen When you connect, IVS-100 control panel screen will be displayed. Camera direction Up, Down, Left, Right, Home Camera speed adj

may be higher Standard: System default value Frame rate ad-justment directly Adjust video frame rate via giving a number directly. 1, 5, 10, 15, 20,

User Setup user name, password and login privilege IP Filter Setup legal IP address of user login (This func-tion should be used with function “Use

Camera Screen This screen is displayed when IVS-100 menu option is clicked. Note: please adjust carefully to have proper machine configurations. Cam

Image, Rotate, Mirror, Focus Mode, White Balance These functions are reserved for future product developing. They are not functional in IVS-100. Satu

Table of Contents CHAPTER 1 INTRODUCTION... 1 Overview ...

To use camera tour function, the camera should be connected the RS485 connector, and the external camera should be sup-ported by Video server. Users

DDNS Setting The DDNS is designed to eliminating the inconvenience brought by dynamic IP ad-dressing, by allowing users to connect to your LAN using

PPPoE screen Please consult your ISP personnel to obtain proper PPPoE/IP address related information, and input carefully. If Internet con-nection

User Screen This User setting can set up to 10 different usernames and passwords. Every one set of username and password can be acted as an Administr

Application Setting Parameters in the Basic configuration menu provide machine adjustment; the avail-able configurations are listed below: Icon Men

FTP Client Screen FTP Client Screen Network Settings FTP server name IP address or domain name of the destination FTP server Username, Password Ple

SMTP Screen This screen is displayed when the SMTP menu option is clicked. SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail mess

Alarm 1 & Alarm 2 Screen This screen is displayed when the Alarm 1/Alarm 2 menu is clicked. You can select Manual or Event for the Alarm mode. Al

Motion Detection Screen This screen is displayed when the Motion Detection menu option is clicked. You can Enable/Disable function and adjust the sen

Time Setting Screen This screen is displayed when the Time Setting menu option is clicked. Time Screen Network Settings IP Cam Time Provides settin

Popup Screen This screen is displayed setting event message while motion or sensors has been ac-tivated When any one of alarms enabled, and one of th

Firmware upgrade Screen This screen is displayed when you click the Firmware Upgrade menu on the Status screen. Firmware Upgrade Screen This screen

6. The upgrade progress status information will be displayed on the screen. Once the upgrading process completed, the Video server will reboot the

Network Settings FTP Upload a captured image to server Mail Mail captured image to specific mail address Alarm 1 Enable Alarm output 1 Alarm 2 Enab

ActiveX Control This feature only supports on the ActiveX control within Microsoft® Internet Explorer. View This screen is displayed when you cli

Status Bar A status bar display on the button of the image. Split This screen is displayed when you click the “Split” menu on the ActiveX control. T

Recoding Screen Save as JPEG: Select this option and click “Save as JPEG” for detailed configurations. The pre-defined schedule can be set by JPEG.

During the AVI file recording, a red icon displays on lower right position of the image to indicate the AVI saving process. If want stop the recordi

44

Appendix A Alarm I/O Connector Appendix A Alarm I/O Connector An external sensor that senses physical changes in the area Video Server is monitor-ing

1 Chapter 1 Introduction This Chapter provides details of the IVS-100's features, components and capabilities. Overview PLANET IVS-100 digitizes

Appendix B Troubleshooting Appendix B Troubleshooting Q: The video and audio codec is adopted in the Video server? A: The Video server utilizes JPEG

Q: IP Finder program (ipeditv3) cannot find IVS-100 A:• Re power the IVS-100 if cannot find the unit within 1 minute. • Do not connect IVS-100 over

dow will appear to download ActiveX Controls. When using Windows NT, Windows 2000 or Windows XP, log on with an appropriate account that is au-thoriz

zoom position. Move the object off IVS-100, or adjust the zoom position. • Some objects are difficult to focus on by the external Auto Focus camera.

C Appendix C Bandwidth Calculation Appendix C: Bandwidth Calculation The frame rate of video transmitted from the IVS-100 depends on connection bandw

D Appendix D Specifications Appendix D: Specifications Model IVS-100 Hardware Network 1 x 10/100Mbps RJ-45 port Alarm Input/Output 2 x In / 2 x Out

IVS-100 can be deployed in many different situations, such as library, train station or factory production line to provide efficient, human-resource

Physical Details IVS-100 Front Panel Front Panel LAN port Use a standard LAN cable to connect your IVS-100 to a 10/100BaseT hub or switch. Alarm I/O

Rear Panel Video-in Use a standard LAN cable to connect your IVS-100 to a 10/100BaseT hub or switch. Audio-in IVS-100 provides a terminal block with

Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. • Pla